Silex technology Embedded Intelligent Module SX-560 Specifikace stáhnout pdf (Strana 92)

Table 40 TCP/IP Commands

Command

Description

SET IP MEthod

Sets method of getting IP address

The default value is Auto.

Format:

SET IP MEthod [ AUTO | DHCP | STATIC ]

SET IP REtry

Enables or disables LPD retry on incomplete job

The default value is Disable.

Format:

SET IP REtry [ENable | DIsable]

SET IP ROuter

Sets default router address

The default value is 0.0.0.0.

Format:

SET IP ROuter aa.bb.cc.dd

SET IP SUbnet

Sets IP subnet mask

The default value is 0.0.0.0.

Format:

SET IP SUbnet aa.bb.cc.dd

SET IP TCP

Enables or disables the raw TCP 9100 protocol

The default value is Enable.

Format:

SET IP TCP [ENable | DIsable]

SET IP TELnet

Enables or disables Telnet protocol

The default value is Enable.

Format:

SET IP TELnet [ENable | DIsable]

SET IP TFTP

Enables or disables TFTP protocol

The default value is Enable.

Format:

SET IP TFTP [ENable | DIsable ]

SET IP TImeout

Sets TCP inactivity timeout.

If fast timeout is enabled, the timeout is calculated as seconds.

If fast timeout is disabled, the timeout is calculated as minutes.

The default value is 1 minute.

Format:

SET IP Timeout n

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 103 104

Komentáře k této Příručce

Žádné komentáře

Silex technology Embedded Intelligent Module SX-560 Specifikace Strana 92

Komentáře k této Příručce

Související produkty a manuály pro Sítě Silex technology Embedded Intelligent Module SX-560